[TowerTalk] What a FOOLISH Act Re: Neverseize on rohn tower legs
Gary Bonnor
jamieb at optusnet.com.au
Tue Jan 5 18:56:28 PST 2010
Who would be so foolish to work on a tower of any height without
having a ground crew ??
Even if it is only a harmonic to go and get help if everything turns
"pear shaped" !!!
Gary
VK4ZGB
At 05:55 AM 6/01/2010, W3YY wrote:
>Tony -
>
>As previously noted, neverseize or not, you just need a ground crew to put a
>little upward pressure on the section while someone is on the tower
>assisting with the separation. No big deal. A tower jack or similar device
>will help in difficult situations.
>
>Now, if you want to do this without ground support, its more difficult.
>Take off the bolts and go to the ground and put constant pressure on the
>section yourself and tie it off, then go back up and wiggle it to free it.
>Or, maybe hang some heavy weights (two bags of concrete) on the rope going
>to the gin pole and go up and try to free the section.
>
>Good luck. I've assembled and disassembled tower sections single-handed,
>but it's much easier if you can get some ground support.
>
>73, Bob - W3YY
================== snip =====================
More information about the TowerTalk
mailing list