[TowerTalk] FT1000MP

[Bill Gillenwater]

John, I think you'll fnd that most people using the receive jack are using 
some type of outboard receive antenna switch to take the receiver out of 
harms way. I have damaged the receive section by not using the correct 
switching.
73 Bill K3SV

----- Original Message ----- 
From: <jcowens1 at comcast.net>
To: "Towertalk" <towertalk at contesting.com>
Sent: Wednesday, January 13, 2010 1:50 PM
Subject: [TowerTalk] FT1000MP


>
>
> Would like to get in touch with anyone who did own or does own a FT1000MP 
> and has used the separate receive antenna jack for a receive only antenna 
> while using the A or B antenna jacks for the transmit antenna. The manual 
> does not say if it blanks the receive antenna input when transmitting. 
> This could cause a problem with RF coming into the receive jack when 
> transmitting on A or B on the same band. Anyone operating Top Band and 
> using separate Rx and Tx antennas would likely have done this.
>
>
>
> John Owens - N7TK
>
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>