[TowerTalk] Repairing Yaesu G-800SA

[Jim Brown]

On Tue, 26 Jan 2010 00:14:05 -0500, Terrence R. Redding Ph.D. wrote:

>I am wondering if there is a source for the six pin and seven
>pin female connectors that attach at the rotor motor end of the 
>rotor control cable?

I'm looking at schematic in the Yaesu manual for the rotor I bought 
new this summer. The part numbr for the connector attached to the 
rotor is NJC-207-RW. The cable-mounted connector that mates with it 
is NJC-207-PF. At the time, I looked at the connectors and decided 
that they were Japanese parts, but I did not recognize a mfr. 

The same manual also includes schematics for the G-2800DXA. The 
corresponding connectors for that rotor are designated NJW-207-RW 
and NJW-207-PF. I've not seen a G-2800DXA, so don't know the 
difference between the connectors. 

The connectors for both rotors are 7-pin connectors. 

73,

Jim K9YC