[TowerTalk] plugs

[Hans Oortman 1]

Terry,

It's an enormous long link so I suggest the following:

The website is:  www.conrad.com

Select the UK-site and type in the box "partnr." the number 742122 (for the
female plug) and 742002 (for the male part of the plug).

As I said; th're expensive but are of a much better quality. Btw: the Yeasu
plugs are about the same price, where by the old ones do not fit on the new
type rotors. Yaesu still has the old plugs available though.

In order to fit these replacement plugs on the old version Yaesu rotors, I
have made a small adaptor on my lathe which, on one side excepts the
original 3 through holes on the rotor and on the other side excepts the
square part of the male plug.
But this is purely a cosmetic thing, a rubber seal may work also.

If you want me to send some pictures, I can but then I need to go to my
workshop and make a few pictures of the overhauled rotors....they are better
then new!

73's

Hans
PA3ARW 

-----Oorspronkelijk bericht-----
Van: Terry Dunlap [mailto:terry at kk6t.com] 
Verzonden: dinsdag 26 januari 2010 19:10
Aan: Tower and HF antenna construction topics.
CC: pa3arw at euronet.nl
Onderwerp: Re: [TowerTalk] plugs

Hi Hans,

I know the photos won't work but could you post the links for the plugs 
to the reflector for the rest of us Yaesu owners.

Thanks.

73 de Terry KK6T


Hans Oortman wrote:
> Terry,
>
>  
>
> I'm at my office at the moment. As soon as I get home I'll send you some
> photo's and links of the plugs I am using now.
>
> Talk to you later!
>
>  
>
> Hans
>
>   _____  
>
> Van: Terrence R. Redding Ph.D. [mailto:terry at oltraining.com] 
> Verzonden: dinsdag 26 januari 2010 13:31
> Aan: Hans Oortman
> CC: towertalk at contesting.com
> Onderwerp: Re: plugs
>
>  
>
> Good morning Hans,
>
> Are you talking about changing plugs on the rotor motor?  Do you have a
link
> to the kind of plug you are now using?  I am going to redo the cabling to
> the tower, replace with all new, and will do all plugs at the same time.
>
> Terry - W6LMJ
>
>
> On 1/26/10 4:42 AM, "Hans Oortman" <pa3arw at euronet.nl> wrote:
>
> Terry,
>  
> The plugs for the Yaesu rotors are available directly from Yaesu.
> Personally I have changed all plugs on any rotor (4 pcs, 2 Large Create
and
> 2 Yaesu rotors) I have with military style ones which are cheaper and
> better!
> In Europe they are available from Conrad. Radioshack or Fair Radio Sales
> might have them as well.
>  
> 73's
>  
> Hans Oortman
> PA3ARW
> Pa3arw at euronet.nl
>  
>  
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>