[TowerTalk] Fwd: AB577 Clamp Wrench

[k4tmc at aol.com]

 Yes, a screwdriver works great.  After mine broke, I never even considered getting a replacement.

73,
Henry - K4TMC


 


 

 

-----Original Message-----
From: Dick Green WC1M <wc1m73 at gmail.com>
To: 'Mike' <k4gmh at arrl.net>; towertalk at contesting.com
Sent: Sat, Jul 3, 2010 12:15 pm
Subject: Re: [TowerTalk] AB577 Clamp Wrench


Try Ontario Surplus: http://www.ontariosurplus.com



The wrench is part of the launcher assembly, so it doesn't show up on the

parts list. But Ontario might have them.



As I recall, a screwdriver works, too.



73. Dick WC1M



-----Original Message-----

From: Mike [mailto:k4gmh at arrl.net] 

Sent: Friday, July 02, 2010 11:00 PM

To: towertalk at contesting.com

Subject: [TowerTalk] AB577 Clamp Wrench



Need to replace the wrench used to secure and remove the clamps on an

AB577.  One of the wrench's prongs for engaging the clamp broke off during

Field Day installation of the tower.  Any ideas where to obtain another

wrench or repair the broken one?



-- 

  73,

  Mike, K4GMH





_______________________________________________







_______________________________________________

TowerTalk mailing list

TowerTalk at contesting.com

http://lists.contesting.com/mailman/listinfo/towertalk