[TowerTalk] Harbor Freight WInch

[Larry stowell]

Don't forget that is double pull rating. Single pull is 650.

Another winch manufacture is Dutton-Lainson.

73 Larry K1ZW

-----Original Message-----
From: towertalk-bounces at contesting.com [mailto:towertalk-bounces at contesting.com] On Behalf Of Tommy
Taylor
Sent: Monday, July 12, 2010 3:38 PM
To: mcelmer1; towertalk at contesting.com
Subject: Re: [TowerTalk] Harbor Freight WInch

Mike,

I would look at the 1300 lb rated  "Hoist" from Harbor Freight.  It uses 
wire rope not chain and is designed for overhead lifting.  Several people in 
the Phoenix area have fixed these to crankup towers and they work very well. 
They have 4 models of Hoists, but I would go with the highest rated one 
(1300lb).  There are 20% percent off coupons for HF all over the place, 
which would make your purchase about  $100.   They run off 120 VAC.  The SKU 
# is 02954 and you can examine it on their website.

73/Tommy  W7RV

--------------------------------------------------
From: "mcelmer1" <mcelmer1 at netecin.net>
Sent: Sunday, July 11, 2010 12:04 PM
To: <towertalk at contesting.com>
Subject: [TowerTalk] Harbor Freight WInch

> Any thoughts on using a Harbor Freight winch for a U.S. Tower 55 ft 
> crankup??
>
> I think the one sold by U.S. Towe is around $1200 versus $150 for the 
> Harbor Freight model.
>
> Mike
> W8TRN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk