[TowerTalk] Best Way to Shine Old Antennas
Roger (K8RI)
K8RI-on-TowerTalk at tm.net
Mon Jul 12 20:25:05 PDT 2010
On 7/12/2010 7:22 PM, DENNIS BRICKEY wrote:
>
> I have cleaned and shined several older oxidized yagis by first spraying the parts with an acidic mag wheel cleaner from the local auto parts store. I allow it to foam for a couple of
>
> minutes, and then rinse thoroughly with a water hose. This removes all the old oxidation, dirt, etc. I stole the idea from an HVAC service man who used a weak solution of HCL
>
Which when purchased as Muratic Acid is much cheaper. Of course it
removes metal as well as the oxides.
73
Roger (K8RI)
> and water to clean AC coils.
>
>
>
> I then use 0000 steel wool to shine/buff the aluminum tubing.
>
>
>
> It is a pretty quick process that has worked well for me. I have experienced no pitting or aluminum degradation
>
>
>
> Good Luck,
>
>
>
> Dennis
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list