[TowerTalk] Truss clamp for 2" mast ??
K7LXC at aol.com
K7LXC at aol.com
Thu Jul 22 16:02:58 PDT 2010
In a message dated 7/22/2010 5:25:02 A.M. Pacific Daylight Time,
towertalk-request at contesting.com writes:
> For my homebrew antennas I fasten a small plate of aluminum to the mast
with
a u-bolt. The plate has holes on each end and I connect a 3/8 EJ
turnbuckle
to each side of the plate for the boom truss. For larger antennas I mount
a
piece to angle stock to the mast, perpendicular to the boom and use two
turnbuckles on each half of the boom (four total) to create a V truss.
You don't even need any kind of plate. Just mount the eye of the
turnbuckle on the end of the U-bolt and use a big washer to capture it under the
nut and you're good to go!
Cheers,
Steve K7LXC
TOWER TECH
More information about the TowerTalk
mailing list