[TowerTalk] Hygain 155CA to N6BV spec's

[Pete-N4KW]

Tim,   About ten years ago I did some optimizing on the 155ca using YO 
software.  I still have the software but its not loaded and is a DOS based 
program.  I can check through my files as I know I never throw away any 
antenna files.  I should still have the spacing and tapper schedule if you 
want them.
My modeling was for a single antenna and did not model it as a stack so not 
sure how it would behave in that environment.  The antenna worked very well 
and I sent my findings to Hy-Gain and Roger (do not recall his call) wrote 
back and said he really liked the results but they would stand pat on what 
they were using.
73 Pete N4KW


----- Original Message ----- 
From: "Tim Wininger" <ky5rtim at gmail.com>
To: <towertalk at contesting.com>
Sent: Saturday, July 31, 2010 4:59 PM
Subject: [TowerTalk] Hygain 155CA to N6BV spec's


>I looked back thru the achieves but didn't get much data on
> anyone trying  N6BV published mods of the Hygain 155BA/CA .
>
> So here's the question again:
>
> Need input/experiences of any op that has re dimensioned the 155.
>
> I am getting ready to stack a pair and would like to have a broader SWR
> bandwidth.
> Looking at YW this seems to be the answer however after reading KL7RA's
> post of a few years back it seems that there could be some cut and try
> effort
> involved. I know that's the case as not many cookie cutter guarantees in 
> all
> this.
>
> Thanks for any info,
>
> Tim, KY5R
> "in the Heart of Dixie"
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk