[TowerTalk] Penetrox, Oxguard Noalox question

[Gene Smar]

Gerry:

     They're all equivalent.  Also, while you're buying the paste, pick up a 
couple of 3M Scotchbrite scouring pads.  Use one to clean off the last layer 
of crud from the aluminum before you apply the paste.  Use the second one to 
rub the paste into the surface.  (If you use one pad for both purposes, 
you'll be smearing the crud around into the paste.)  And use the paste 
sparingly.  It should just be a thin layer and shouldn't ooze out of the 
connection.

73 de
Gene Smar   AD3F


----- Original Message ----- 
From: "r young" <ryoung158 at gmail.com>
To: <towertalk at contesting.com>
Sent: Thursday, March 18, 2010 1:43 PM
Subject: [TowerTalk] Penetrox, Oxguard Noalox question


> It's hard to find Penetrox where I live. Are Oxguard, and NoAlox 
> equivalent
> for assembling yagis etc?
>
> Anyone have a favorite?
>
> Tks ,
>
> Gerry
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk