[TowerTalk] M2 OR2800PDC question

[Ed Stallman]

Skip, yes it could be the reed switch. I be leave I can test that 
here in the shack, I could use my 24 volt supply and  connect direct 
to terminal 1 and 2 . I would have to keep a close eye on the rotor 
to be sure not to go past north .
Today and Tmw we have gust to 35 mph , so will wait for a better day

Ed N5DG




At 11:31 PM 3/19/2010, you wrote:
>Ed, I would suspect the reed switch.  When it doesn't want to turn,  try
>moving it in the same direction several times and check and see if 
>it turns  a
>very small amount. If the controller doesn't get feed back from the reed
>switch it will shut the motor down.
>
>
>
>Skip, _KJ6Y_ (http://www.kj6y.com/)
>_New WEB Site Communications  Service Co_
>(http://www.communicationsserviceco.com/)
>818-887-3569
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk