[TowerTalk] Drill bits

Guy Molinari guy_molinari at hotmail.com
Wed Mar 24 12:21:49 PDT 2010


Hi Steve,

    I got 15 plates with the AB-105 hardware.   I'll only need 6 of them for the 2 towers I'm putting up.   Since I have them and they are rusty, I'm going to enlarge the holes before I get them hot dipped.

 

If you know someone who needs some AB-105 hardware, I'll have some nice galvanized plates left over.

 

Guy
 
> From: K7LXC at aol.com
> Date: Wed, 24 Mar 2010 13:44:13 -0400
> To: towertalk at contesting.com; guy_molinari at hotmail.com
> Subject: Re: [TowerTalk] Drill bits
> 
> 
> Here's my 2 cents worth. I'd use a small bit for a pilot hole and then use 
> a step-drill (e.g. Unibit) to get it to the desired size. Those 
> step-drills will enlarge it to a nearly perfect round hole in short order. 
> 
> What are you building that you need 140 holes for? Sounds kind of 
> ambitious - hi. 
> 
> Cheers,
> Steve K7LXC
> TOWER TECH
> 
> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/


More information about the TowerTalk mailing list