[TowerTalk] LM-354 Tower Base Bolts

[Eugene Jensen]

Do you need the manual I have the one for the last run of them. Senf Phone
number and I'll tell how to do the cage. Gene K2QWD 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Gary Schafer
Sent: Friday, March 26, 2010 1:13 PM
To: 'Tower and HF antenna construction topics.'
Subject: Re: [TowerTalk] LM-354 Tower Base Bolts

Hi Ron,

I have one of those towers to put up this summer (hopefully). Did you buy
the base, the part that goes in the concrete, from tashjian? What did they
charge for it and shipping?

Thanks,
Gary K4FMX

> -----Original Message-----
> From: towertalk-bounces at contesting.com [mailto:towertalk- 
> bounces at contesting.com] On Behalf Of Ron W8RJL
> Sent: Friday, March 26, 2010 12:57 AM
> To: towertalk at contesting.com
> Subject: [TowerTalk] LM-354 Tower Base Bolts
> 
> I am installing a used Tri-Ex LM-354 crank up tower. Can anyone tell 
> me the proper grade of bolt (hardness) to use in this application. The 
> LM-
> 354 tower is 54 foot self supporting and will have a 3 element SteppIR 
> for wind load. There are three 3/4" bolts securing each leg to the 
> steel ears sticking out of the concrete base. I'm sure I can purchase the
3/4"
> bolts from Tashjian Tower in California but shipping is very expensive.
> Tashjian wanted $400 shipping and handling for getting the base to the 
> east coast. I started looking through the archives but did not see 
> anything on bolts. Thanks, Ron W8RJL 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk