[TowerTalk] Conduit size?

[Mike]

Jim,

I have the same here, I used 2" and it was still a struggle to get two runs
of LMR-400, Steppir and Rotator control cable through it. I think you would
struggle with 1 1/2" conduit.

Mike, K6BR

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Jim Miller


I'm planning to run about 70ft of conduit to service two RG213 (or Bury
Flex) runs and a single Channel Master 3 conductor control wire. It will be
a straight run with 90 degree sweeps at both ends.

I'm planning on moving from this house in 2 years and really don't plan on
investing more on antennas here so additional runs aren't really an issue.

Will 1.5" electrical PVC be adequate to handle this or do I need to go to
2"?

thanks

jim ab3cv
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk