[TowerTalk] side mounting on a UST HDX589

Hector Garcia XE2K j_hector_garcia at sbcglobal.net
Thu May 20 18:21:35 PDT 2010


Eric

US towers have one of those  mountings  , have a  photo in my files,   if you want  to see it let me know



 J. Hector Garcia XE2K / AD6D
Mexicali B.C  DM22fp
P.O.Box 73 
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org




________________________________
From: "ke2d at comcast.net" <ke2d at comcast.net>
To: towertalk at contesting.com
Sent: Thu, May 20, 2010 12:33:52 PM
Subject: [TowerTalk] side mounting on a UST HDX589



I am considering side-mounting a 10m LJ-105CA at the 38ft level, which is the top of the second section of a HDX-589.    Does anyone know of someone selling a pre-fabricated bracket that will fit the UST, or has anyone fabricated some sort of bracket that will attach to the top of a UST tower section?  I was thinking of taking measurements of the inner diameter of the section's two legs on one side, then having some sort of "pins" slightly smaller than the inner diameter welded to an aluminum or steel plate, which could then use U-bolts to hold the boom of the yagi.  Sort of how I have seen a TIC-Ring rotor attached to someone's UST awhile back.   Is TIC-Ring still around?   I really don't need a rotor for this yagi, as I was planning on leaving it fixed towards Europe, but I am not opposed to a TIC-Ring. 



Anyone do something similar and care to share their ideas? 



Thanks 

Eric 

K2WD 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


More information about the TowerTalk mailing list