[TowerTalk] Impedance at the Feedpoint

[Steve Hunt]

I needed 13 Ohms ground loss to get to his measured resistance of 32 Ohms.

But it doesn't matter whether that is right or wrong, nor what the value 
is on 80m, because compared to the Resistive component of the feedpoint 
impedance - several thousand Ohms - it will be insignificant.

Steve G3TXQ


On 06/11/2010 22:51, Al Williams wrote:
> how did you determine the ground loss resistance of 13 ohms at 1.8 mhz&
> what would be the ground loss resistance at 3.5 mhz?
> k7puc
>