[TowerTalk] A3S tribander gone bad

[n4zkf]

Not so much they are bad. Just in the wrong spot. You can't tell the
difference between them by just looking at them. They could be just in the
wrong place.

 

You'll need a grid dip to see the difference. I would remove the screw and
slide the covers off first to make sure they are not burnt, don't have bugs
in them

as mentioned earlier also.

 

 

 

From: Rob Katz [mailto:rob.katz at thelegacycenter.com] 
Sent: Monday, November 15, 2010 11:28 AM
To: towertalk at n4zkf.com
Subject: Re: [TowerTalk] A3S tribander gone bad

 

Dave,

Thanks for your reply.  Sounds like I need to disassemble the beam and test
the traps to identify the bad one(s) - is that right?  Do you know of a way
to do that test with an MFj259 antenna analyzer?

Thanks and 73,
   Rob, KA1ARB


To:     <towertalk at contesting.com>
Subject:     Re: [TowerTalk] A3S tribander gone bad
From:     "n4zkf" <towertalk at n4zkf.co <mailto:towertalk at n4zkf.com> m>
Date:     Mon, 15 Nov 2010 08:07:15 -0500
List-post:     <towertalk at contesting.com
<mailto:towertalk at contesting.com%22> ">mailto:towertalk at contesting.
<mailto:towertalk at contesting.com> com>
Sounds like the traps are in the wrong spot and the only way to tell the
difference is with a grid dip.... Been there, done that....

73 Dave
n4zkf