[TowerTalk] STACKED 40 METER BEAMS MATCH

[K1TTT]

I'm not using any core, just bring the two of them to a box that lets me
pick each one separately or just parallels them directly... bring that back
to the shack and go through an mt-3000 to shift the min swr from cw to ssb
and even out between singles and both, and no problem here.  The little
mismatch on the hardline to the shack doesn't bother me at 40m.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: Bob Gibson [mailto:w5rg at yahoo.com]
> Sent: Sunday, November 21, 2010 16:06
> To: TowerTalk at contesting.com
> Subject: [TowerTalk] STACKED 40 METER BEAMS MATCH
> 
> Hi All...I'm having a hell of a time trying to match a pair of 40 meter M2
> 4 ele
> beams..both antennas have 1.5 swr or less at 7.150..high or low..switching
> to
> both it goes up to 2.1 swr..I'm using a ft-240 core..I have tried 4 turns
> or 5
> turns with not much change..any ideas?  I don't want to go buy a stack
> match!
> Bob W5RG
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk