[TowerTalk] L5PNM-RC connector instructions: DAVIS RF Co. Response

[Stephen Davis]

Hi Tom, 

The Andrew web site is showing LDF5-50A Heliax as "obsolete" but it is out there and still for sale by us and others.   Thus I think they
may have eliminated the instructions for L5PNM-RC, the 7/8" N male  (for your LDF5 cable) on their web site (not too helpful !!) .   However, I am quite sure that the
LDF4.5 (5/8" OD Heliax) RC connector instructions are the same. 
  
To be sure, or to check further for a copy of the install instructions, call their tech line:   1-866-333-3272

Please let me know what they say ref.LDF5 cable and the  instructions for the L5PNM-RC  so that I am updated.

Here's the link for the LDF4.5 RC connector instructions :  

http://awapps.commscope.com/catalog/andrew/doc/N_Connectors_for_HELIAX__LDF4_5-50_Coaxial_Cable.aspx?id=0000006%2ft009_r02793_v0.pdf

73, Steve ,  K1PEK, 

DAVIS RF Co. 

Wire, Cable, RF Connectors and wire aerial parts.   LMR, Heliax, Eupen

Commercial and Marine – Custom Cable Design – Military/Industrial

Tel:  978-369-1738     Fax:  978-369-3484
www.davisRF.com


On Nov 22, 2010, at 9:21 PM, towertalk-request at contesting.com wrote:

> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Mon, 22 Nov 2010 18:59:55 -0500
> From: "Sain'T Tom" <dxhawg at windstream.net>
> Subject: [TowerTalk] L5PNM-RC connector instructions
> To: <TOWERTALK at contesting.com>
> Message-ID: <7F2C395D29CE4BAFA75F0BB4DA9314DA at OMAX>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> 	reply-type=original
> 
> If anyone could email me Andrew instructions for attaching an L5PNM-RC 
> connector to LDF-5,  I would greatly appreciate it.
> 
> If you know the exact web address for obtaining the same instructions, that 
> would also help.  I have searched the Andrew/Commscope website but have yet 
> to locate what I need.
> 
> Thanks/73
> Tom K4RV 
> 
> 
> 
> ------------------------------
>