[TowerTalk] Retracting crankup tower in horizontal position

[Richard Karlquist]

 If you don't have positive pull down, you should be able to just slide the
top section
 out and let the cable go slack.  Has anyone done this?  

 Rick N6RK

 On Fri 08/10/10 6:48 AM , Dan Bookwalter  wrote:

 I have read on here in the past that the US Towers are designed to be
cranked 
 "up" when they are in the horizontal position , but , my concern is
since i dont 
 have positive pull down , how in the world i would retract it since
gravity 
 wouldnt be assisting me ? i was hoping to do the rotor work etc... at
ground 
 level but unless i can retract it , i dont see how I can.

 Thanks

 Dan N8DCJ

 _______________________________________________

 _______________________________________________
 TowerTalk mailing list
 TowerTalk at contesting.com
 http://lists.contesting.com/mailman/listinfo/towertalk
[1]">http://lists.contesting.com/mailman/listinfo/towertalk

 

Links:
------
[1] http://lists.contesting.com/mailman/listinfo/towertalk