[TowerTalk] Fulton K-1550 winch

[Guy Molinari]

Good point Ian.  
 
I used a 3/4" box end wrench to hold the shaft in place and tapped the clutches with a hammer.    This freed them up and I was able to get the job done.
 
This may be off base, but in the future I suspect that removing tension on the cable if the system will be idle could be a good thing.
 
73,
Guy N7ZG
 
> Date: Thu, 21 Oct 2010 07:29:16 +0100
> To: towertalk at contesting.com
> From: gm3sek at ifwtech.co.uk
> Subject: Re: [TowerTalk] Fulton K-1550 winch
> 
> Guy Molinari wrote:
> >
> >Thanks to all who responded to my call for help. I got it sorted out.
> >
> 
> Please tell us how, for future reference.
> 
> 
> -- 
> 
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk