[TowerTalk] Is there any difference between a Ham4 VS T2X controller?

[k6ye at comcast.net]

Marty ET AL, 

I can attest to the fact that the Ham-IV controller can be used in place of the T2X. Good luck in your quest. 

Semper Fi, 

Tommy - K6YE 

DX IS 


----- Original Message ----- 
From: TexasRF at aol.com 
To: n8de at thepoint.net, Brahmangou at aol.com 
Cc: towertalk at contesting.com 
Sent: Monday, October 25, 2010 11:36:41 AM 
Subject: Re: [TowerTalk] Is there any difference between a Ham4 VS T2X controller? 

And the extra LED that let's you know the brake switch is depressed (as if 
you would not know that). 

73, 
Gerald K5GW 




In a message dated 10/25/2010 12:20:04 P.M. Central Daylight Time, 
n8de at thepoint.net writes: 

NO difference. Just the "tailtwiser" label on the front. 

73 
Don 
N8DE 

Quoting Brahmangou at aol.com: 

> Hi All, 
> 
> I'm piecing my station together after a major lightning strike. My 
> Tailtwister controller took a big hit, but after bringing the rotor 
> down from the 
> tower and bench testing it, the rotor itself works OK. On the bench, I 
> hooked it up to a Ham IV controller. The combination turns and 
indicates 
> position fine. I'm just wondering if the T2X controller has a bigger 
> transformer 
> in it, or any other differences, that would make me not want to use this 
> combo. 
> 
> 73, 
> Marty AB5GU 
> _______________________________________________ 
> 
> 
> 
> _______________________________________________ 
> TowerTalk mailing list 
> TowerTalk at contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk 
> 



_______________________________________________ 



_______________________________________________ 
TowerTalk mailing list 
TowerTalk at contesting.com 
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________ 



_______________________________________________ 
TowerTalk mailing list 
TowerTalk at contesting.com 
http://lists.contesting.com/mailman/listinfo/towertalk