[TowerTalk] Speaking of the Han Series of rotators...How do you tell the difference.

[Todd Coulter]

Roger,

Maybe this page from Norm's Rotor Service will help.

http://rotorservice.com/serv3%20identify.htm


73's
Todd
N4JRZ

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Roger (K8RI)
Sent: Tuesday, October 26, 2010 2:07 AM
To: TOWERTALK at contesting.com
Subject: [TowerTalk] Speaking of the Han Series of rotators...How do you
tell the difference.

I recently inherited a couple of basket cases. They appear to be ham 
IV's but how do you tell the ham IV rotator minus control box,  from the 
other models?  Other than having to clean out a lot of dirt and replace 
the bearings...I replaced the terminal strips with the TailTwister 
pigtails and connectors. Welll... I really didn't have to replace the 
bearings, but I like shiny bearings rather than old dull black ones. 
That and I discovered you can purchase them from Hy-gain including the 
retainers for between 1/3 and 1/4 the price at the hardware store which 
used to be an inexpensive place to get things like that.

73

Roger (K8RI)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.862 / Virus Database: 271.1.1/3219 - Release Date: 10/25/10
14:34:00