[TowerTalk] Sealed container needed for tuner - NA6T

[Bob Smith]

Hi Chas,

I do a lot of installing of devices on commercial towers, building, 
etc and I've had real good luck with the
L-com enclosures.  Take a look at the link below, it has all their 
enclosures, both NEMA3 - 4 , etc.  The
prices are good depending on what is inside the box, they come with 
lower sealed openings, AC power,
network connections, etc.  I've got a few of their boxes on towers 
that have been up for 5-7 years and show
very little signs of wear,, AND they are dry inside, (I'm in NW 
california, the rain country)

http://www.l-com.com/productcenter.aspx?id=3225


hope this helps

Bob,  NA6T

Robert Smith Consulting
"Wireless Installations -- Government, Businesses & ISP's"
F.C.C. Licensed-Commercial & Amateur Services
A.R.S NA6T
ARRL Life Member
1-707-964-4931 w/answering machine
Fort Bragg, California   95437

"On The Air-Conditioned Mendocino Coast, In REAL Northern California"
No trees were destroyed in the sending of this message.
However, a large number of electrons were terribly inconvenienced.




------------------------------

Message: 4
Date: Wed, 13 Apr 2011 19:17:14 -0500
From: chas <chasm at texas.net>
Subject: [TowerTalk] Sealed container needed for tuner
To: towertalk <towertalk at contesting.com>
Message-ID: <4DA63D0A.4050805 at texas.net>
Content-Type: text/plain; charset=ISO-8859-1

I want to mount an SGC-239 tuner on the tower below a vertical.  but I need a
UV proof, sealed, water tight container that I can put the tuner inside - and
then put that tuner in a tupperware? into another container if it can be
found.   And all of this as cheap as possible.

I think that NMEA cases are just too expensive but that might have to be the
end choice.

thanks
chas k5dam


------------------------------