[TowerTalk] FW: "F" CONNECTORS

[n4zkf]

I bought both the tool and the connector at Harbor Freight. Now I don't
usually step foot in that place but a friend to me about them and said they
were "exactly" the same ones brand and all he bought at Home Depot so I went
and checked it out. Sure enough, they work fine. Grease and all in them.


73 Dave n4zkf





-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Edwin Karl
Sent: Friday, April 15, 2011 9:27 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] FW: "F" CONNECTORS

Local TV installer parts supply company has "F" connectors made for 
outside, little grease in the part
that catches the shield/ jacket. Rubber washer inside about 10 cents 
each in lots of 100. Radio
Shack on the other hand has 2 for $4, you pays your monay and takes your 
choice.. Crimper maybe
$10 as I remember (but I'm a senior so not sure about memory)

73

ed K0KL

On 4/15/2011 2:52 PM, Allan Greening wrote:
>
>> ______________________________________________
>> From: 	Allan Greening [mailto:vk3pa at vk3pa.com]
>> Sent:	Friday, 15 April 2011 03:44
>> To:	'towertalk-bounces at contesting.com'
>> Subject:	"F" CONNECTORS
>>
>> Wot do u use or which is better!!
>> To use compression fittings or crimp fitting ?
>> For  a 160m rx tri phased array in which the supply voltage for the
>> preamps is feed down the coax RG6..
>> De vk3pa
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1209 / Virus Database: 1500/3575 - Release Date: 04/15/11
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk