[TowerTalk] Antenna Part Needed

[n8de at thepoint.net]

The element brackets used on the 6m beam are identical to those on the  
KLM 10m yagi.

Had 6 of them here ... sold some .. not sure where the rest are  
located.   Probably in a box in the garage.

73
Don
N8DE



Quoting john at kk9a.com:

> The DX Engineering brackets are for a 7/8 element.  I have some black
> insulated brackets from the old N0XX/7 DX Engineering company that attach a
> 5/8" diameter element to a 2" boom which may work.
>
> John KK9A
>
>
> To: Jon Pearl - W4ABC <jonpearl at tampabay.rr.com>
> Subject: Re: [TowerTalk] Antenna Part Needed
> From: KR5DX <kr5dx at yahoo.com>
> Date: Tue, 9 Aug 2011 22:57:25 -0500
> List-post: <towertalk at contesting.com">mailto:towertalk at contesting.com>
>
> DX Engineering will have what you need.
> 73
>
>>
>>
>> On 8/9/2011 8:54 PM, Mike Ryan wrote:
>>> I am in need of an element to boom mounting block for an older KLM 6
>>> meter
>>> beam. The boom is 2" material, the element to boom part is plastic or
>>> bakelite, etc (non-metalic) and is roughly 6" long. The element that
>>> rests
>>> on this is 1/2" in diameter.  Anyone have anything they'd like to part
>>> with/sell?  -Thanks.  - Mike
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>