[TowerTalk] Yaesu rotors
Jim Spears
n1nk at cox.net
Thu Aug 11 08:08:00 PDT 2011
Both of my rotors are DXA version. I just hooked the 2800DXA control box to
the 1000DXA rotor and it works just fine.
I took a glancing lightning blow recently and am sorting out the good from
the bad. Right now it certainly looks like the 2800DXA rotor belongs in the
"bad" collection. Too bad, it is much easier to deal with a broken control
box on the ground than a rotor mounted on the tower.
Jim/N1NK
From: TexasRF at aol.com [mailto:TexasRF at aol.com]
Sent: Thursday, August 11, 2011 9:43 AM
To: n1nk at cox.net; towertalk at contesting.com
Subject: Re: [TowerTalk] Yaesu rotors
The voltages are compatible. Be aware there are SDX and DXA versions and you
might want to do some checking before just connecting them together.
73,
Gerald K5GW
In a message dated 8/11/2011 8:25:39 A.M. Central Standard Time,
n1nk at cox.net writes:
Anyone know if a G1000 rotor and G2800 control box (or vice versa) are
compatible? Not necessarily for long term use but for a bit of debugging.
Jim/N1NK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list