[TowerTalk] TB3 Bolts

Mark Robinson markrob at mindspring.com
Sat Aug 13 07:11:32 PDT 2011


On the advice of others. I replaced the plated mast clamp bolts ( horizontal 
bolts) with s/s hardware and applied plenty of Never Seez to the threads. I 
don't want to have to drill those bolts out while standing on the top of the 
tower.


Mark N1UK


----- Original Message ----- 
From: "Tim Duffy K3LR" <k3lr at k3lr.com>
To: "'Georgens, Tom'" <Tom.Georgens at netapp.com>; <towertalk at contesting.com>
Sent: Friday, 12 August, 2011 11:48 AM
Subject: Re: [TowerTalk] TB3 Bolts


> Hello Tom!
>
> There are 4 bolts on the Rohn TB-3 that attach it to the top tower plate.
>
> The galvanized bolts are 0.500" in diameter - the nuts are 0.750" and the
> bolt head is 0.875". They are 1.5" long. The as drilled holes in the 
> bearing
> mount are 0.59375" in diameter.
>
> The three horizontal bolts that secure the mast are 0.375" diameter.
>
> 73,
> Tim K3LR
>
> -----Original Message-----
> From: towertalk-bounces at contesting.com
> [mailto:towertalk-bounces at contesting.com] On Behalf Of Georgens, Tom
> Sent: Friday, August 12, 2011 10:35 AM
> To: towertalk at contesting.com
> Subject: [TowerTalk] TB3 Bolts
>
> Hello
>
>
>
> Does anybody know the size of the bolts that connect a TB3 thrust
> bearing to the top of the tower.
>
>
>
> Thanks for your help
>
>
>
> 73, Tom W2SC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 



More information about the TowerTalk mailing list