[TowerTalk] Two signals on the same frequency?

Chet chetmoore at cox.net
Sun Aug 14 13:48:55 PDT 2011


I don't think you will be any louder but At least one consequence of tx's on
the same freq is a much wider bandwidth.
"Hypothetically" It would likely  keep the other contesters from as cq'ing
close to your frequency as they could running a single xmtr.

Chet N4FX

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Jari Jussila
Sent: Sunday, August 14, 2011 12:25 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Two signals on the same frequency?


A hypothetical question:

I have two antennas for the same band. The antennas might be same kind 
(eg. two dipoles, two yagis) or different (one dipole, one vertical).
I transmit with two separate transmitters - one to one antenna - but 
modulate the transmitters simultaneousl*y *with same key or microphone.

How does my signal-strength change on the other side in comparison if I 
used only one transmitter and one antenna? The antennas are not phased 
to each other and they might be quite apart from each other.

I know that the advanced contest stations have one beam to eg. JA and 
one to Europe etc.  But if they turned both antennas to JA, would the 
signal-strength go up?

Jari, OH2BU
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




More information about the TowerTalk mailing list