[TowerTalk] Inverted vee mounted above HF Yagi

[Richard (Rick) Karlquist]

The inverted vee is likely to significantly distort the
pattern and/or SWR of the Yagi.  Are you sure you want
to do this?

Rick N6RK

On 8/17/2011 12:31 PM, Jack White wrote:
>
> Hi Guys
>
> I have a standard 60ft Versatower with a Yaesu G-1000 and bearing mounted at the top, and just above this I have a Cushcraft A3WS (pic on QRZ). I want to extend the stub mast about 20ft above the A3WS to support the centre of a 160/80/40 trapped inverted vee. I'm looking for some type of mount that will allow me to mount the centre of the inverted vee at the top of the stub mast and remain fixed whilst the stub mast rotates. Ideas/advice would be great.
>
>
> 73, Jack G8DX
>
>
>   		 	   		
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>