[TowerTalk] Non-Conductive Mast Section

[Jim Brown]

On 12/8/2011 9:23 PM, Keith Carter wrote:
> The way I have done this for vertical yagis is to use two metal angle 
> brackets spaced about 2 to 3 feet apart off the side of the tower. 
> Then use a fiberglass pole about 4 feet long (available at most 
> hamfest as military antenna mast sections)

Several guys have suggested some variation of this approach. It seems to 
make good sense to me, and is what I'll probably do.  What I'm looking 
for now is suggestions about those stand-off brackets.

Many thanks to all who have contributed a bunch of good ideas.  This 
list is a great resource!

  73, Jim K9YC