[TowerTalk] Have you had old tower sections hot dip galvanized?

[Dino Darling]

Pacific has a $125.00 minimum. No minimum on weight. They'll galvanize a
1/4-20 nut for you if you want!

Dino - KX6D
 
 
-------- Original Message --------
Subject: Re: [TowerTalk] Have you had old tower sections hot dip
galvanized?
From: Grant Saviers <grants2 at pacbell.net>
Date: Wed, December 14, 2011 11:56 am
To: 
Cc: towertalk at contesting.com, jim at audiosystemsgroup.com

I've used Pacific Galvanizing in Oakland for parts, they may be the 
nearest to you. 100# minimum, I forget what it cost. They have a strip 
tank. If there is too much rust, they will charge for sandblasting. 
There is some useful info on the web site.

http://www.pacificgalv.com/

Grant KZ1W


On 12/14/2011 11:34 AM, Robert wrote:
> Google ?
>
> ----- Original Message -----
> From: "Jim Brown"<jim at audiosystemsgroup.com>
> To:<towertalk at contesting.com>
> Sent: Wednesday, December 14, 2011 8:19 AM
> Subject: Re: [TowerTalk] Have you had old tower sections hot dip galvanized?
>
>
>> On 12/14/2011 8:11 AM, Dino Darling wrote:
>>> I 've had tubular towers re-galvanized here in Southern CA.
>> How did you find the company to do it, and what did it cost? I'm too
>> far away to use your company, but I'd like clues about how to find a
>> local resource.
>>
>> 73, Jim K9YC
>> _______________________________________________