[TowerTalk] Technical Question.

[Chuck]

I think they will probably affect each other.  I would check the SWR of both 
on 10 meters and then mount the beam below the tri-bander and see what the 
difference is.  If there is a major change in SWR, you can bet the 
performance will be degraded.  You could mount the 10 meter beam at right 
angles to the tri-bander to lessen the interaction.

Chuck W5PR

----- Original Message ----- 
From: <k2qmf at juno.com>
To: <towertalk at contesting.com>
Sent: Sunday, December 25, 2011 4:52 PM
Subject: [TowerTalk] Technical Question.


> Seasons greetings,
>
> Can I stack a 3 or 4 element 10 meter
> beam under a triband Yagi on the same mast??
>
> The separation will be about 8 feet.
>
> Will the tribander effect the ten meter yagi
> considering the tribander also covers 10 meters??
>
> Any help or suggestions would be very much appreciated....
>
> 73,
> Ted  K2QMF
> ____________________________________________________________
> 60-Year-Old Mom Looks 27
> Mom Reveals Free Wrinkle Trick That Has Angered Doctors!
> http://thirdpartyoffers.juno.com/TGL3141/4ef7a9b18c0dc251946bst01vuc
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk