[TowerTalk] Antenna Supports

[Mirko S57AD]

Spiderbeam18m (60') Alu mast would be ideal for what Kelley plans, but 
don't know if there is any US vendor...

73 Mirko, S57AD

S, Al Kozakiewicz piše:
> I used 32' of fiberglass sections to support a K9AY loop, guyed in one place about 24 feet up.  It's very sturdy once up and should be OK if sufficiently guyed, but I don't know how you'd stand 68' up without snapping like a twig.  You'll need some coordinated help, or a cherry picker.
>
> Al
> AB2ZY
>
> ________________________________________
> From: towertalk-bounces at contesting.com [towertalk-bounces at contesting.com] On Behalf Of Kshaddrick [kshaddrick at jetup.net]
> Sent: Friday, June 17, 2011 4:43 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] Antenna Supports
>
> One of my summer antenna projects is to put up two 40m dipoles in an inverted V arrangement perpendicular to each other. I'd like the apex of the V to be a half wave length above the ground, so a little over 68 feet. What can be used for a support for something like this? Can the 4 foot aluminum/fiberglass mast sections available on eBay be used at that height (guyed of course)? That would be about 17 or 18 of those sections, not sure how stable that would be. Other suggestions?
>
> Thanks,
>
> Kelley
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>