[TowerTalk] Rohn 45 Bearing Plate

[Kevin Adam]

Try Norms Fab shop he's in Michigan he can make you one just for you job 
that you need.

http://www.normsfab.com/
W8TTH

Welding & Machining
2201 Porter Hwy.
Adrian, Michigan 49221
517-263-7363

norm at normsfab.com

just Good friend

N9IWW


-----Original Message----- 
From: K7LXC at aol.com
Sent: Tuesday, May 03, 2011 7:38 PM
To: towertalk at contesting.com ; rfman45 at hotmail.com
Subject: Re: [TowerTalk] Rohn 45 Bearing Plate


In a message dated 5/3/2011 2:08:40 P.M. Pacific Daylight Time,
towertalk-request at contesting.com writes:

>  I am using Rohn 45 and want to put a second thrust bearing  between the
rotator and mast. The bearing plate p/n BPL45G can only be mounted  at the
top. Is there any way of putting a second bearing plate between the  rotator
and the the top baring plate?


        Skip the 2nd thrust  bearing. You'll need a real precise fit to
prevent binding and these parts  aren't that precise. Just put the plate it.
You only need it to capture the mast  when the bottom of the mast is loose 
and
the AS is plenty.

Cheers,
Steve      K7LXC
TOWER TECH -
Professional tower services for hams
Cell; 206-809-4188
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk