[TowerTalk] Pinning mast?
K7LXC at aol.com
K7LXC at aol.com
Mon Nov 7 11:50:44 PST 2011
Howdy --
I've got a sloppy fit between a mast clamp and a mast - both steel. It
won't shim properly so I think my only option is to pin the mast. I've
done it a bunch of times and mostly they hold butr sometimes they don't so I'm
proposing to use 2 in one direction and another two 90 degrees from the
first two with good-sized high strength bolts. Other than the challenge of
doing it at altitude, is there anything else I should be considering? Or is
there another way to do it?
This is a prop pitch with big antennas on it.
Cheers,
Steve K7LXC
More information about the TowerTalk
mailing list