[TowerTalk] Ac connection.

[K1TTT]

The instructions for the sdx models say that different transformers are
installed to change the input voltage.  I don't know about the dxa but
suspect it is the same.  You can run these on green heron or any other
controller that puts out 8-24vdc for the motor and uses a 500ohm pot for
indication.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
 

> -----Original Message-----
> From: slonim aron [mailto:as1935 at 012.net.il] 
> Sent: Friday, November 11, 2011 10:21
> To: towertalk at contesting.com
> Subject: [TowerTalk] Ac connection.
> 
> 
> Hi,
> Have the Yaesu G-2700SDX   and the G-2800DXA 
> motors.Both are marked 110ac, wonder if there is any tap 
> on the transformer inside the control unit which will allow 
> 240vac (main in Israel) operation?
> Thanks .
> Aron 4x1fq.
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>