[TowerTalk] DX Engineering Coax Stripper Question

[Tony]

On 10/1/2011 8:39 PM, Phil & Debbie Salas wrote:
> I use the DXE strippers with my crimp connectors.  After stripping, all that is necessary is to snip back the center condutor so the crimp pin is just about flush with the inner dielectric.
>
> Phil - AD5X

Thanks Phil.

I should be receiving my DXE stripper via UPS this week.

Tony
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>