[TowerTalk] A3/A4 tuning information

W0MU Mike Fatchett w0mu at w0mu.com
Sun Oct 23 16:53:43 PDT 2011


The only comment I have is that it is an MFJ product now.  I wonder if 
those traps have the same issues as the coils on the new XM240  ie the 
screw coming loose and bad connections.

Mike W0MU

J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net


On 10/23/2011 4:08 PM, John Crovelli wrote:
> John KK9A et al.
>
> Some additional information.  This is a brand new A4 antenna right out of the box from Cushcraft.  The direction of the traps was clearly marked with stickers and all traps were properly installed in the right direction.  And npne of the traps from the A4 had drain holes (an obvious mfgr error) but the TK traps for the 40M addon kit did have the holes drilled.
>
> Further, in shipment, over half of the SS hoseclamps were deformed/crushed.  Had to buy six new ones to replace clamps that were not salvageable.
>
> The antenna is mounted in the clear at least 35 feet above a roof on an HDBX 48 foot tower.  There are no other antennas nearby.....so we can pretty much eliminate interactions of any kind.
>
> Using the factory dimensions for tuning the DE for either 'center' or 'CW' that come with the A744 40M addon kit,  the bandwidth was only about 180 khz on 20M, 350 khz on 15M, and maybe 500 khz on 10m, but in no case could I get the minimum SWR where I wanted it so the antenna would provide both cw and phone coverage.
>
> On 40 meters there was 120 khz of bandwidth, what I expected, and it had a minimum at 7055 which was what I was looking for.
>
> There are four possible points of adjustment on each element half.  The maximum adjustment on each element half (between the 'center' and 'CW' options per the manual ) is 14 inches.
>
> Since I could not hit the desired sweet spot frequencies on any of the bands using the factory settings, I strongly suspect the traps are not tuned to the proper frequency for the dimensions provided.   One or both of the TC and TD traps are potentially defective from the factory.  This would account for the inability to hit the desired mid-point frequencies in the SWR curves, and the lack of overall bandwidth on 15 and 20, etc. where there should be nearly 500 khz.
>
> I have assembled and installed more than a dozen A3/A4 + A744 addon antennas so I'm very familiar with their assembly and installation.
>
> I'm looking for info from anyone who might have had this same experience and/or opinions of others what might be wrong.  I have received several off line resonses so far, one of which confirmed the antenna should have nearly 500 khz of bandwidth, particularly on 20 and 10 meters.
>
> And no, I don't have the traps in my possession.  They are still on the antenna which is currently mistuned in the air at 50'.
>
> 73,
>
> John Crovelli W2GD/P40W
>
>    		 	   		
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


More information about the TowerTalk mailing list