[TowerTalk] QSL card in the hole before the concrete pour

Mike noddy1211 at sbcglobal.net
Mon Oct 31 15:48:15 PDT 2011


Just throw your own QSL in, that's where you want the prized DX to go to via
the antenna and tower.

Mike

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Richard Thorne
Sent: Monday, October 31, 2011 3:44 PM
To: Towertalk
Subject: [TowerTalk] QSL card in the hole before the concrete pour

Well my concrete guy solve my problem of going square or round on the 
base of the tower, he made it square, and over sized at that.  He's 
going 4' square by 4' deep, that should hold up some tower.

I also moved my guy points out a bit.  Its an 80' tower and I had the 
guy points at 65' originally, I moved them out to 80' so it will give me 
more room to stack antennas between the 40' and 80' levels.

Now for the more important question.  If I remember correctly, I'm 
supposed to sacrifice a prized qsl card by throwing it in the bottom of 
the hole prior to the pour, correct?

Rich - N5ZC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1834 / Virus Database: 2092/4586 - Release Date: 10/31/11



More information about the TowerTalk mailing list