[TowerTalk] QSL card in the hole before the concrete pour

Chuck w5pr at swbell.net
Mon Oct 31 17:56:25 PDT 2011


It has to be a JA card.  I am not superstitious, but I did this in all my 
tower holes before the pour. (Just to be sure!)

Chuck W5PR

----- Original Message ----- 
From: "Richard Thorne" <rmthorne at att.net>
To: "Towertalk" <towertalk at contesting.com>
Sent: Monday, October 31, 2011 5:44 PM
Subject: [TowerTalk] QSL card in the hole before the concrete pour


> Well my concrete guy solve my problem of going square or round on the
> base of the tower, he made it square, and over sized at that.  He's
> going 4' square by 4' deep, that should hold up some tower.
>
> I also moved my guy points out a bit.  Its an 80' tower and I had the
> guy points at 65' originally, I moved them out to 80' so it will give me
> more room to stack antennas between the 40' and 80' levels.
>
> Now for the more important question.  If I remember correctly, I'm
> supposed to sacrifice a prized qsl card by throwing it in the bottom of
> the hole prior to the pour, correct?
>
> Rich - N5ZC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 



More information about the TowerTalk mailing list