[TowerTalk] AV-640

[Dan Schaaf]

Roger
I have had similar problems with SWR and I found that once a year, I have to 
remove all of the hardware, clean all metal surfaces that are joined by 
screws using a small wire brush, then putting Penetrox paste on those 
joints.
All SWR problems then go away.
It is very wet here in FL and aluminum oxide shows up on antennas.

Best Regards
Dan Schaaf
K3ZXL www.k3zxl.com
NOBSKA www.nobska.net
Cape Cod Instruments www.gnm-inc.com
Tel: 941-766-0706
Fax: 941-766-0707