[TowerTalk] 45g Tower

[Larry]

Go to http://rohnnet.com/rohn-45g-tower and download or view the
45G Brochure which shows various configurations and recommended
bases/guy anchors.

73, Larry  W6NWS
----- Original Message ----- 
From: <starrose444 at aol.com>
To: <towertalk at contesting.com>
Sent: Wednesday, September 14, 2011 7:05 PM
Subject: [TowerTalk] 45g Tower


>
>   Again thanks for all the information about using a mid section for a 
> base.This is my first tower so I want to do it right.I have 8 10ft 45g 
> sections and one 45ag top section would like to make two towers.Each tower 
> will only be about 35-45 feet in height I am elevated at 1100 feet now on 
> a very large farm.I was told the hole should be about 3x3 and 5 feet 
> deep.They will not be aginst the house so I have two sets of guy wires Iam 
> thinking a set on each?Any information like how much gravel in the hole 
> grounding etc.
>
>
>
>
>
> Thanks
> Bob
> Kc8phb
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>