[TowerTalk] 30 meter yagi

[Dino Darling]

Thats awesome! What's the spacing and how are you feeding it? Split
driven with a beta? How about OWA?

Dino - KX6D
 
 
-------- Original Message --------
Subject: Re: [TowerTalk] 30 meter yagi
From: "Stan Stockton" <k5go at cycle-24.com>
Date: Thu, September 29, 2011 6:33 am
To: <Cqtestk4xs at aol.com>, <TOWERTALK at contesting.com>

Bill,

OD Wall Exposed Length Overall Length

.375 .058 32 36
.500 .058 32 36
.750 .116 68 72
1.000 .116 68 72
1.250 .116 68 72
1.500 .116 36 36

Half element lengths, .058 = single wall, .116 = double wall, uses 
6063-T832 and is good for 89 MPH. Each element weighs 18.17 pounds.
Lengths shown would resonate well below 10 Mhz so the MPH rating of 89 
MPH is very worst case.

The cost from Cycle-24.com would be $97.20 per element.

Stan, K5GO


> ----- Original Message ----- 
> From: <Cqtestk4xs at aol.com>
> To: <TOWERTALK at contesting.com>
> Sent: Thursday, September 29, 2011 8:13 AM
> Subject: [TowerTalk] 30 meter yagi
>
>> Looking for plans to build a 3 el Yagi for 30 meters...nothing 
>> fancy. I don't need one engineered for 150 MPH, but don't want to have it 
>> look like spaghetti at 50 MPH.
>>
>> Any ideas?
>>
>> Bill KH7XS/K4XS