[TowerTalk] 30 meter yagi

Stan Stockton stan at aqity.com
Thu Sep 29 06:29:58 PDT 2011


Bill,

OD        Wall        Exposed Length        Overall Length

.375        .058            32                            36
.500        .058            32                            36
.750        .116            68                            72
1.000      .116            68                            72
1.250       .116           68                            72
1.500        .116          36                            36

Half element lengths, .058 = single wall, .116 = double wall, uses 
6063-T832 and is good for 89 MPH.  Each element weighs 18.17 pounds. 
Lengths  shown would resonate well below 10 Mhz so the MPH rating of 89 
MPH is very worst case.

The cost from Cycle-24.com would be $97.20 per element.

Stan, K5GO


----- Original Message ----- 
From: <Cqtestk4xs at aol.com>
To: <TOWERTALK at contesting.com>
Sent: Thursday, September 29, 2011 8:13 AM
Subject: [TowerTalk] 30 meter yagi


> Looking for plans to build a 3 el Yagi for 30 meters...nothing  fancy. 
> I
> don't need one engineered for 150 MPH, but don't want to have it  look 
> like
> spaghetti at 50 MPH.
>
> Any ideas?
>
> Bill KH7XS/K4XS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 



More information about the TowerTalk mailing list