[TowerTalk] Baluns for RX antennas
Craig Smith
craig at powersmith.net
Mon Apr 23 12:34:19 PDT 2012
I leave the ends of the coax open and measure across the choke with the short test leads attached to the shield at either end. Just like you would measure any inductor. The AIM will then plot Impedance, Reactance and Resistance as a function of frequency.
73 Craig AC0DS
So you short shield and center together on each end, and then measure
across the whole assembly with some jumpers from Coax on AIM to the UUT?
Or just the center, or the shield?
More information about the TowerTalk
mailing list