[TowerTalk] four square box

[Jeff Blaine]

Thanks Tim,

I thought they would be similar.  Any delta in reliability, durability or 
other kinds of creature comforts?

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Tim Duffy K3LR
Sent: Wednesday, August 29, 2012 9:17 PM
To: 'Jeff Blaine' ; towertalk at contesting.com
Subject: Re: [TowerTalk] four square box

Hello Jeff:

I have tested and used both of these units. With ground mounted mono band
verticals - the performance difference between the two was not significant
on 80 meters.

As a test - we installed the DXE unit in one four square and the Comtek unit
in another other four square - so side by side near field and DX operational
measurements could be made at the exact same time.

The forward gain from the array was the same (within .1 dB near field). The
front to back null was within 2 dB, DXE vs. Comtek. The amount of power at
the dump port was within 1 dB.

Both units give excellent on air results.

73,
Tim K3LR

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Jeff Blaine
Sent: Wednesday, August 29, 2012 9:07 PM
To: towertalk at contesting.com
Subject: [TowerTalk] four square box

Is there a general consensus on preference between the performance of the
Comtek and DX Engineering units?

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk