[TowerTalk] four square box

[Jeff Blaine]

Thanks Mark,

I also like that omni mode.  It should be easy to tune up because I can 
measure the current/phase with the VNA using the W8WWV method.

Big change for me - my first outdoor antenna since moving to a new QTH. 
Prior work was all attic based - and I'm very glad to be getting out of that 
business.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Mark Robinson
Sent: Thursday, August 30, 2012 1:40 PM
To: Jeff Blaine
Cc: TowerTalk at contesting.com
Subject: Re: [TowerTalk] four square box

I have the DX Engineering box and you are going to like the omni direction
feature. I don't know if the Comtek box has that.

With careful measuring and construction of the array, I am getting 30dB
front to back out of my 40m 4 square.


73 Mark N1UK


----- Original Message ----- 
From: "Jeff Blaine" <keepwalking188 at yahoo.com>
To: <towertalk at contesting.com>
Sent: Wednesday, 29 August, 2012 10:07 PM
Subject: [TowerTalk] four square box


> Is there a general consensus on preference between the performance of the 
> Comtek and DX Engineering units?
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk