[TowerTalk] Hi Gain Hi Tower ??
K8RI
K8RI-on-TowerTalk at tm.net
Fri Dec 21 19:26:06 EST 2012
On 12/19/2012 9:56 AM, Wayne Kline wrote:
> Hi Roger
>
> The small 24' BX style towers are not the failure Point. it's the
> 44' stinger that's the area of failure !
That's what I'm saying. Guy the stinger. I di that here with multiband
verticals.
73
Roger (K8RI)
> Another friend who's of the DX- Expedition type suggested I opt for the
> tapered fiberglass poles. !
>
> Still trying to model or see why the insulated stinger at the top of
> the tower has such a remarkable effect ?
>
> Wayne W3EA
>
> ( I am sorry for the post, I am not able to get word wraparound to
> function on this reflector ! )
Came out fine here.
>
> > From: K8RI-on-TowerTalk at tm.net
> > To: towertalk at contesting.com
> > Date: Wed, 19 Dec 2012 08:52:36 -0500
> > Subject: Re: [TowerTalk] Hi Gain Hi Tower ??
> >
> >
> > Why not guy them with phillystran or poly rope?
> >
> > 73
> >
> > Roger K8RI
> >
> > ----------------------------------------
> > From: "Wayne Kline" <w3ea at hotmail.com>
> > Sent: Sunday, December 16, 2012 9:28 PM
> > To: "towertalk at contesting.com" <towertalk at contesting.com>
> > Subject: [TowerTalk] Hi Gain Hi Tower ??
> >
> > Hi fellow Tower Talkers.. . I built a 75/80 meter Four Sq, antenna
> system
> > many years ago. It was feed with an original DX eng. ( not the new Dx
> eng
> > co.) quadature. The Hi Gain Hi towers were stripped of everything and a
> > center stinger was built and the system was resonantat 3.625 MHZ and
> > the power dump at 3.500 was 70 watts and at 3.825 was 100 watts. I used
> > the two insulators at the two stinger vertical element with a 14ga wire
> > attached at it's bottom and travel down the inside of the 24ft base
> tower
> > attaching at the feed point. There are 108 evenly spaced 1/4 radials
> under
> > each antenna, with silver soldered connections at there interesting 8ga
> > copper X and 9- 8 ft 5/8" ground rods. One at each tower base, one at
> > the control box in the center of the array and 4 at the end of the
> > centered X wire.I had a few 80 meter ops who felt that because I
> insulated
> > the top 38' stinger at the top of the tower resulting in a Shorter over
> > hight antenna was a compromise. So I
> > got in touch with tim K3LR knowing he also had a 75/80 meter 4 SQ mad
> out
> > of Hi-Gain Hi Towers, He sent me a rough dimension of his stinger out
> the
> > top of his Hi-Tower. I un insulated the stinger and built my elements
> > and achieved resonance with an additional 9ft height.Well it seemed
> My WX
> > in eastern PA did not like the 48' stinger and I would loose one at
> almost
> > every Nor'easter Storm. SO I am thinking of going back to the
> > original configuration with insulated top 2" tuber and the 14 ga wire
> down
> > the center of the tower to the base. Thought's out there Just kicking
> > around ideas ? Wayne W3EA
> > _______________________________________________
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list