[TowerTalk] Hy-Gain LJ-155CA dimensions

[W5XB]

Thanks Joe and Arne,  that's why I love this list...I was looking at it wrong...AND confusing the 155 with 105 which I am also putting together. 

The latter (105) uses 3 pieces of tubing and I am trying to figure out how much to over lap them as the two inner pieces do have a margin to overlap of a couple of inches + or -. I do have the dimension for the tips on 105.

Arne, would love to see pictures of your swinging gates...am planning a taller tower in the future. Am thinking of swinging the 105 and 115 on the same "taller gate" instead of two gates and two rotators.

73s es tnx,

Grant
W5XB



  ----- Original Message ----- 
  From: N7KA at comcast.net 
  To: W5XB 
  Sent: Monday, February 20, 2012 5:58 PM
  Subject: Re: [TowerTalk] Hy-Gain LJ-155CA dimensions


  Forgot this:  The tip lengths is the exposed length. Nothing else needed.  No need for overall element length.


  Arne N7KA


------------------------------------------------------------------------------
  Hy-Gain 155 CA. Been a while since it was up. Don't 
  see/remember how much to overlap the tubing.
  Have the manual, but do not see the actual over all element 
  lengths, just the tip dimensions.
  Anyone have the over all element lengths or lengths from the 
  boom?
  Tnx es 73s,
  Grant
  W5XB
  _______________________________________________
  _______________________________________________
  TowerTalk mailing list
  TowerTalk at contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk